Summary fields on this page were extracted by AI from the bid documents. Always verify dates, amounts and requirements against the official solicitation.
What the bid is for
Contractor shall furnish all labor, supervision, materials, equipment, tools, transportation, mobilization, traffic control, testing, permits, disposal and incidentals necessary to perform the following categories of work in a first-class, workmanlike manner. Categories are descriptive, not limiting.
**Geographic Area** - All LCRA-owned, leased, operated or managed property.
Scope
Description of Services and Deliverables
- Pavement Assessment and Planning Support: Pavement condition surveys, distress mapping, PCI-type scoring, and inventory of paved assets by site. [...] Support for multi-year pavement management planning, prioritization and capital budgeting.
- New Asphalt Construction: Clearing, grubbing, demolition and removal of existing surfaces. [...] Construction of new parking lots, drive aisles, access roads, turnarounds, pads and shoulders.
- Overlays, Milling and Resurfacing: Cold milling / planing to specified depth and cross-slope, including edge milling and butt joints at tie-ins. Mill-and-overlay and structural overlays with leveling courses as required.
- Reconstruction and Rehabilitation: Full-depth pavement reconstruction, including removal and replacement of base and subgrade. Full-depth reclamation (FDR) and cold in-place recycling where suitable.
- Pavement Repair and Patching: Full-depth and partial-depth saw-cut patching of potholes, alligator cracking, rutting, shoving and base failures.
- Preventive Maintenance and Surface Treatments: Crack routing, cleaning and hot-pour or cold-applied crack sealing. Seal coat / chip seal, fog seal, scrub seal and sand seal. Slurry seal and micro-surfacing.
- Concrete Paving and Flatwork: Portland cement concrete (PCC) paving for drives, heavy-duty pads, dumpster and transformer pads, aprons and truck turnarounds. Sidewalks, shared-use paths, thresholds, stoops, steps and handrails.
- Aggregate, Gravel and Unpaved Surfaces: Construction, regrading, reshaping and re-crowning of aggregate access roads and yards.
- Substation Yard Surfacing: Placement, replenishment and regrading of crushed-rock surfacing inside substation fence lines to specified depth and resistivity requirements.
- Drainage and Site Appurtenances: Storm inlets, area drains, trench drains, culverts, headwalls, flumes and rundowns associated with paved areas.
- Pavement Markings, Signage and Site Safety Features: Layout and installation of paint, thermoplastic or preformed markings: stalls, accessible stalls and access aisles, fire lanes, crosswalks, stop bars, arrows, legends and hatching.
- Traffic Control and Temporary Facilities: Traffic control plans, devices, flagging and pedestrian routing in accordance with the Texas Manual on Uniform Traffic Control Devices (TMUTCD).
- Emergency and Unscheduled Response: Twenty-four (24) hour, seven (7) day emergency call-out capability with a designated single point of contact and defined response times.
- Planned and Outage-Driven Work: Work sequenced around scheduled generation outages, substation clearances, dam maintenance windows and park seasonal closures.
- Related and Incidental Work: Demolition, hauling, recycling and lawful disposal of removed materials. Surveying, staking and as-built documentation.
Additional information
Unless an SOW specifies otherwise, work shall conform to the most current editions of the following, in order of precedence: (1) the statement of work and project drawings/specifications; (2) LCRA standards and specifications; (3) the standards listed below; (4) manufacturer’s written instructions.
- TxDOT Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges, and applicable TxDOT Standard and Special Specifications.
- Texas Manual on Uniform Traffic Control Devices (TMUTCD).
- 2010 ADA Standards for Accessible Design and the Texas Accessibility Standards (TAS), including TDLR registration and inspection where required by project value.
Materials shall be new, from approved sources, and supported by mix designs, certifications and test reports submitted for LCRA review prior to placement.
*Exhibit A - Coverage Map* is provided as a separate PDF.
