Construction of Equipment Shed at M5

Sealed proposals will be received by Christopher Nerell of the North Carolina State Ports Authority in Room 100A of the North Carolina Maritime Building, 2202 Burnett Blvd., Wilmington, NC, 28401, phone no. (910) 746-6364, for the furnishing of labor, material and equipment entering into the construction of INDUSTRIAL DRIVE IMPROVEMENTS, North Carolina State Ports Authority, Port of Wilmington, NC. The NCSPA Contract No. is C-1786.

The Base Bid scope of work for this project will be referred to as “Industrial Drive Improvements” and includes the construction of a new 302’ x 50’ pre-engineered metal building (canopy) and all associated concrete foundations, slabs and utility services. Associated work includes site demolition (paving, storm drainage, misc features); new full-depth pavement; pavement milling & overlay; drainage & grading; maintenance of traffic; bollards, fencing and lighting; and other miscellaneous appurtenances.

The Additive Alternate 1 scope of work for this project will be referred to as “Canopy Roof Drainage System” and includes approximately 750 LF of new underground storm drainage piping to convey rooftop drainage below grade.

The Additive Alternate 2 scope of work for this project will be referred to as “Heavy-Duty Pavement Upgrades” and includes furnishing and installing a thickened pavement section at designated areas shown on the Contract Drawings.

The Additive Alternate 3 scope of work for this project will be referred to as “Virginia Avenue Drainage Improvements” and includes new underground drainage piping and structures, and associated pavement replacement, to improve drainage within the vicinity of Virginia Avenue.

The Additive Alternate 4 scope of work for this project will be referred to as “Plumbing Shed Electrical” and includes new electrical equipment, conduit and wiring to upgrade the existing service and distribution within the Plumbing Shed.

Sealed proposals will be received up to **3:00 pm, Thursday, December 17, 2026**, and will immediately thereafter be publicly opened and read.

Bids will be received for Single prime construction contract. All proposals shall be lump sum.

Bidders should clearly indicate on the outside of the bid envelope "BID PROPOSAL FOR INDUSTRIAL DRIVE IMPROVEMENTS", their North Carolina General Contractor's License Number and that the bid is for "Single Prime Bid".

The owner reserves the right to reject any or all bids and to waive informalities.