GSU - RFQ Replace Terminal Units, Clarkston Building CH, Ground, 1st, and 2nd Floors

This Request for Quotes (RFQ or Sourcing Event) is being issued to establish a contract with a qualified supplier who will meet the State Entity¿s needs as described in this Sourcing Event. [...] The scope of work for this project will include the replacement of the dual duct terminal units on the ground floor, 1st floor, and 2nd floor of the CH Building.

The scope of work for this project will include the replacement of the dual duct terminal units on the ground floor, 1st floor, and 2nd floor of the CH Building.

Only the terminal units that have not been part of recent renovations will be replaced. The temperature sensors associated with these units will be replaced as well. The contractor will demolish and replace ductwork connected to the terminal units and duct mains as needed to replace terminal units. The scope also includes any remaining pneumatic controls to be replaced with electronic controls. Controls vendor to extend existing 120V power to new 24V power for controlling the new terminal units.

Updates to the Building Management System (BMS) controls, including sequence of operations and schematics, are also required, and the new terminal units will be controlled the same as the existing terminal units.

All work shall take place from the end of the spring semester to one week before the start of the fall term and shall be completed within **95 calendar days**.

Work can be performed during normal working hours with the following exceptions:

• remove and replace terminal unit in Room CH2182 (testing room) after normal working hours;
• terminal units in CH1201 and CH1204 (Nursing instructional lab area) can be replaced during normal work hours except for a period of three weeks (5/18/2027 to 6/11/2027).