CEMENT BLOCK WALLS - Heritage IRA

Remove and discard existing exterior 3 cement block walls. Install new 8”x8”x16” cement block walls to pre existing height.

SCOPE OF WORK includes but is not necessarily limited to the following: Complete the removal of 3 existing cement block walls and install new cement blocks and mortar as stated above in the description. All necessary materials needed to complete the project are to be provided by the contractor.

• Price quote shall include all materials (8x8x16 cement blocks, mortar, exterior screws, masonry anchors and hardware) and labor.
• Existing Bilco doors and wooden staircase are to be removed and set aside for reinstallation by the contractor upon completion.
• Demo 3 existing cement block walls under Bilco doors and remove from property.
• Install new 8”x8:x16”. Masonry block and mortar to preexisting height of walls.
• Backfill new block walls with soil and compact said soil.
• Upon completion of block wall construction, reinstall wooden staircase and secure to block walls.
• Reinstall metal Bilco doors and seal to house and around base to prevent water penetration.

**Mandatory** site visit will be held on Friday, October 30th, 2026 at 9:00am.

Bid price is to include all materials, labor, disposal of materials fees and site clean-up.

All contractor’s biding on this project shall be registered with the Department of Labor.

Work must be completed within **60 days** of receiving the purchase order.

Proposal must be valid for 90 days after bid due date.

Work is to be done between the hours of 8:0am and 4:00pm Monday through Friday. Contractor is advised that this is an occupied home and may be occupied during these times.